TensorFlow Lite 8 位元量化規格

下列文件概略說明 TensorFlow Lite 的 8 位元量化配置的規格。這為協助硬體開發人員提供硬體支援，以使用量化 TensorFlow Lite 模型進行推論。

規格摘要

我們提供了規格，而且只有在遵守規格時，才能提供部分行為的保證。我們也瞭解，不同硬體可能會有的偏好和限制，在實作規格時可能會導致實作不精確。儘管在大多數情況下可能可以接受，但我們會提供一套測試，其中充分善用我們所掌握的每項作業容忍度，包括我們從多種模型中收集到的每項作業容忍度)、機器學習性質 (以及最常見的情況是深度學習)，因此無法提供任何保證。

8 位元量化會使用下列公式近似浮點值。

\[real\_value = (int8\_value - zero\_point) \times scale\]

序列 (又稱「轉換作業」中的每個管道) 或每張張量權重，以 int8 兩個在 [-127, 127] 範圍內的互補值表示，零點等於 0。每個張量啟動/輸入會以int8兩個互補值的範圍為 [-128, 127]，範圍為零點 [-128, 127]。

以下將說明特定作業的其他例外狀況。

帶正負號整數與無正負號整數

TensorFlow Lite 量化主要是針對 8 位元 int8 量化工具和核心的優先順序。這是為了便於對稱量化，以零點等於 0 表示。此外，許多後端對於 int8xint8 累計還有額外的最佳化調整。

單一軸與每個張量

按張量量化表示整個張量都有一個比例和/或零點。每軸量化表示 quantized_dimension 中每個切片都有一個比例和/或 zero_point。量化維度指定的是 Tensor 形狀的維度，體重計和零點則對應。舉例來說，如果張量 t 的 dims=[4, 3, 2, 1] 帶有量化參數：scale=[1.0, 2.0, 3.0]、zero_point=[1, 2, 3]、quantization_dimension=1，就會在 t 的第二個維度中量化：

t[:, 0, :, :] will have scale[0]=1.0, zero_point[0]=1
t[:, 1, :, :] will have scale[1]=2.0, zero_point[1]=2
t[:, 2, :, :] will have scale[2]=3.0, zero_point[2]=3

通常，quantized_dimension 是卷積權重的 output_channel，但理論上可以是與核心實作中各點產品對應的維度，在不影響效能的情況下，提高量化精細程度。這大幅提升了準確率。

TFLite 支援每個軸線，能夠處理日益增長的作業。本文件當時支援 Conv2d 和 DepthwiseConv2d。

對稱式與非對稱式

啟用是不對稱式：其可以有零點在簽署的 int8 範圍 [-128, 127] 內的任何位置。許多啟動在性質上都不對稱，而零點是有效達到額外的二元精確度的方式相對低廉。由於啟動值只會乘以常數權重，因此常數零點值可以大幅最佳化。

權重是對稱：強制零點等於 0。權重值可透過動態輸入和啟用值相乘。這表示有不可避免的執行階段成本，乘以權重的零點乘以啟用值。強制執行零點為 0 可以避免產生成本。

數學的說明：這與 arXiv:1712.05877 的 2.3 節類似，差別在於我們允許將縮放值設為每軸。一般來說，此做法具有一般性，如下所示：

$A$ 是量化活化函數的 $m\times n$ 矩陣。
$B$ 是量化權重的 $n\times p$ 矩陣。
請考慮將 $A$、$a_j$ 的 $j$ 列乘以 $k$th 欄的 $k$th 欄，兩者長度為 $n$ 美元。量化整數值和零點值為 $q_a$、$z_a$ 和 $q_b$，$z_b$。

\[a_j \cdot b_k = \sum_{i=0}^{n} a_{j}^{(i)} b_{k}^{(i)} = \sum_{i=0}^{n} (q_{a}^{(i)} - z_a) (q_{b}^{(i)} - z_b) = \sum_{i=0}^{n} q_{a}^{(i)} q_{b}^{(i)} - \sum_{i=0}^{n} q_{a}^{(i)} z_b - \sum_{i=0}^{n} q_{b}^{(i)} z_a + \sum_{i=0}^{n} z_a z_b\]

這個 \(\sum_{i=0}^{n} q_{a}^{(i)} q_{b}^{(i)}\) 術語是不可避免的，因為它會執行輸入值的內積和權重值的內積。

「 \(\sum_{i=0}^{n} q_{b}^{(i)} z_a\) 」和 \(\sum_{i=0}^{n} z_a z_b\) 字詞是由常數組成，這些常數在每次推論叫用時保持不變，因此可以預先計算。

由於啟用期間每次推論都會變更，因此 \(\sum_{i=0}^{n} q_{a}^{(i)} z_b\) 期間必須在每次推論時計算。藉由強制將權重設為對稱性，我們可以消除這個字詞的費用。

int8 量化運算子規格

下方說明 int8 tflite 核心的量化要求：

ADD
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

AVERAGE_POOL_2D
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

CONCATENATION
  Input ...:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

CONV_2D
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1 (Weight):
    data_type  : int8
    range      : [-127, 127]
    granularity: per-axis (dim = 0)
    restriction: zero_point = 0
  Input 2 (Bias):
    data_type  : int32
    range      : [int32_min, int32_max]
    granularity: per-axis
    restriction: (scale, zero_point) = (input0_scale * input1_scale[...], 0)
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

DEPTHWISE_CONV_2D
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1 (Weight):
    data_type  : int8
    range      : [-127, 127]
    granularity: per-axis (dim = 3)
    restriction: zero_point = 0
  Input 2 (Bias):
    data_type  : int32
    range      : [int32_min, int32_max]
    granularity: per-axis
    restriction: (scale, zero_point) = (input0_scale * input1_scale[...], 0)
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

FULLY_CONNECTED
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1 (Weight):
    data_type  : int8
    range      : [-127, 127]
    granularity: per-axis (dim = 0)
    restriction: zero_point = 0
  Input 2 (Bias):
    data_type  : int32
    range      : [int32_min, int32_max]
    granularity: per-tensor
    restriction: (scale, zero_point) = (input0_scale * input1_scale[...], 0)
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

L2_NORMALIZATION
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
    restriction: (scale, zero_point) = (1.0 / 128.0, 0)

LOGISTIC
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
    restriction: (scale, zero_point) = (1.0 / 256.0, -128)

MAX_POOL_2D
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

MUL
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

RESHAPE
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

RESIZE_BILINEAR
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

SOFTMAX
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
    restriction: (scale, zero_point) = (1.0 / 256.0, -128)

SPACE_TO_DEPTH
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

TANH
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
    restriction: (scale, zero_point) = (1.0 / 128.0, 0)

PAD
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

GATHER
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

BATCH_TO_SPACE_ND
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

SPACE_TO_BATCH_ND
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

TRANSPOSE
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

MEAN
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

SUB
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

SUM
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

SQUEEZE
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

LOG_SOFTMAX
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
    restriction: (scale, zero_point) = (16.0 / 256.0, 127)

MAXIMUM
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

ARG_MAX
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

MINIMUM
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

LESS
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

PADV2
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

GREATER
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

GREATER_EQUAL
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

LESS_EQUAL
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

SLICE
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  restriction: Input and outputs must all have same scale/zero_point

EQUAL
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

NOT_EQUAL
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Input 1:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

SHAPE
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

QUANTIZE (Requantization)
  Input 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor
  Output 0:
    data_type  : int8
    range      : [-128, 127]
    granularity: per-tensor

參考資料

arXiv:1712.05877